User Manual
7.3: CONTROL CHANNEL
DSP ELEMENTS > CONTROL CHANNEL
7.3: DSP ELEMENTS > CONTROL CHANNEL
Gain Reduction Meter
Indicates gain reduction for the selected channel.
These are the three LEDs on the left side labelled 1, 5, 10 (dB of attenuation).
Level Meter
Indicates audio level for the selected channel - dBfs
ON
ON key function is dependant on the channel type and selected fader layer. A long press of this
button will use ‘Momentary’ behaviour.
Audio channel/ bus master: Turns channel on (Green) or off (Unlit). When the channel is muted by a Mute group
or VCA Group master, the ON button will be red.
Follow Mode (tOTEM button selected): Switches the send from that channel to the selected bus on or off.
GEQ Mode (GEQ HI or GEQ LO FADERS button selected): Resets the GEQ band to 0dB. ON button will be red
when a GEQ band is ‘active’ (non-zero).
In Audio Channel or with a tOTEM button active, holding an INACTIVE On button down will make the switch
‘momentary’ (it will turn off again when you release it). This facilitates talkback (input channel) and audition bus
(MIX/MTX) functionality.
SEL
Select this Control Channel.
In normal operation this selects the channel or mix master channel, switching the ACS to that channel and
focussing the Touch Screen onto that channel. In other modes, the SEL keys are used to select channels for
inclusion or functionality, such as Mute Group setup or during an Interrogate operation.
Содержание Soundcraft Si impact
Страница 1: ...User Guide V1 6 For Soundcraft Si Impact Console...
Страница 42: ...User Manual 6 1 INPUT CHANNELS CHANNELS BUSSES INPUT CHANNELS 6 1 CHANNELS BUSSES INPUT CHANNELS...
Страница 46: ...User Manual 6 2 MIX OUTPUTS CHANNELS BUSSES MIX OUTPUTS 6 2 CHANNELS BUSSES MIX OUTPUTS...
Страница 50: ...User Manual 6 3 MATRIX OUTPUTS CHANNELS BUSSES MATRIX OUTPUTS 6 3 CHANNELS BUSSES MATRIX OUTPUTS...
