manualshive.com logo in svg

Harman Soundcraft Si impact, Руководство пользователя

Поделиться
Скачать
Harman Soundcraft Si impact Скачать руководство пользователя страница 16

User Manual

3.1: FADER LAYERS

ASSIGNABLE CONTROLS > FADER LAYERS

3.1: ASSIGNABLE CONTROLS > FADER LAYERS

The are four main Fader Layers on the Impact console,  selected by the FADERS button group (A, 
B, C, and D) to the right of the Control Channels. The additional buttons in this group assign Graphic 
EQ bands across the faders for convenient control.

Each layer is made up of 24 Control Channels, plus the Left/Right and Mono/Centre main mix Control Channels.

By default, Layers A and B are assigned to input channels, with the Stereo input channels on the right hand end of layer 

B; Layer C is assigned to Mix Master channels; and the first four Control Channels of Layer D are assigned to the Matrix 

Master channels.

These assignments are user configurable in the FADER SETUP Touch Screen menu (see the Control Channel 

 

Assignment section 3.2.1).

Содержание Soundcraft Si impact





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды