Installing Wall-Mount (MXD) Panels
55
Modero X® Series Touch Panels - Installation & Hardware Reference Manual
MXD-700 Installation Dimensions
FIG. 42 and FIG. 43 provide installation dimensions for the MXD-700:
Use the included Installation Template to ensure proper placement.
NOTE:
Using the Installation Template to select the final placement of the Backbox is highly recommended. The outside edges of the
template are the same dimensions as the touch panel, which allows you to troubleshoot possible conflicts with wall edges, doors, and
other potential obstacles.
The MXD-1000 uses Installation Template
68-5968-03
The MXD-700 uses Installation Template
68-5968-04
1.
Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.
2.
After ensuring proper placement, cut out the mounting surface for the Backbox, using the included Installation Template as a
guide.
NOTE:
Making sure the actual cutout opening is slightly smaller than the provided dimensions is highly recommended. This
provides a margin for error if the opening needs to be expanded. Too little wall material removed is always better than too much.
3.
Thread the incoming Ethernet and USB cables through the surface opening (FIG. 44 and FIG. 45). Note that these figures
show a landscape panel but the installation of a portrait panel is essentially the same, other than the vertical orientation.
FIG. 42
MXD-700-L Installation Dimensions (front view)
FIG. 43
MXD-700 Installation Dimensions (side view)
Notes:
- Dimensions in parenthesis are in millimeters.
- These drawings show a Landscape panel. The dimensions
are the same for Portrait panels, except for the vertical orientation.
Additional detailed installation and product drawings (for both
Landscape and Portrait versions are available to view/download
at www.amx.com
