Harman Martin ELP PAR Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 52

Harman Martin ELP PAR Скачать руководство пользователя страница 47

Martin

®

ELP PAR User Guide

47

Related Items

Martin Companion software

suite (incl. firmware uploader) ......... Free download from www.martin.com

Martin Companion Cable

USB/DMX hardware interface .............................................. P/N 91616091

Ordering Information

ELP PAR in cardboard box ..................................................... P/N 90800000

Specifications are subject to change without notice. For the latest product
specifications, see www.martin.com

Supplier’s Declaration of Conformity

Harman Profes

sional, Inc. have issued an FCC Supplier’s Declaration of

Conformity for this product. The Declaration of Conformity is available for
download from the ELP PAR area of the Martin website at www.martin.com

FCC compliance statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

«
...
45
46
47
48
49
...
»

Содержание Martin ELP PAR





















































Отзывы:

Нет отзывов