Harman Martin ELP PAR Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 52

Harman Martin ELP PAR Скачать руководство пользователя страница 32

32

Martin

®

ELP PAR User Guide

3. Clean lenses by wiping gently with a soft, clean lint-free cloth moistened

with a weak detergent solution. Do not rub the surface hard: lift particles
off with a soft repeated press. Dry with a soft, clean, lint-free cloth or
low-pressure compressed air. Remove stuck particles with an unscented
tissue or cotton swab moistened with glass cleaner or distilled water.

4. Check that the fixture is dry before reapplying power.

Uploading new firmware

Important!

Do not switch the fixture off or disconnect the source of the

firmware during an update, or the firmware will be corrupted.

You can check the currently installed firmware version in the INFORMATION
menu. Firmware updates can be downloaded automatically from the Martin
cloud using the Martin Companion software suite on a PC connected to the
Internet.

Fixture information and settings are not affected when you upload new
firmware to the fixture. All ELP PAR fixtures that are powered on and
connected via a DMX link to the fixture that you update will also have their
firmware updated.

If you update firmware to a newer version, check the ELP PAR area of
www.martin.com to see whether an updated version of this User Guide is
available for the new firmware.

You need the following in order to install firmware:

•

A Windows PC running the latest version of the Martin Companion

software suite that is available for download from the Martin website at
www.martin.com.

•

The latest ELP PAR firmware files (Martin Companion automatically

downloads these from the Martin fixture firmware cloud when you run it
on a PC that is connected to the Internet).

•

A Martin Companion Cable USB-DMX hardware interface (see

” on page

46). Note that you can install new firmware in

multiple fixtures at the same time using the Martin Companion Cable.

To install the ELP PAR firmware using a Martin Companion Cable:
1. Apply power to the ELP PAR fixture(s) and allow it to boot
2.

Connect the Martin Companion Cable’s USB connector to a USB port on
your PC. Connect the Martin Companion Cable’s XLR connector to
either the fixture’s DMX IN connector or the DMX link.

3. Start the PC and launch Martin Companion. Check that the Martin

Companion application correctly detects the Martin Companion Cable (a
green dot should appear next to

USB Connected

in the top right-hand

corner of the window).

«
...
30
31
32
33
34
...
»

Содержание Martin ELP PAR





















































Отзывы:

Нет отзывов