Harman Martin ELP PAR, Руководство пользователя, Страница: 23 / 52

Martin ® ELP PAR User Guide 23
Fixture test
You can run an automatic sequence to test all the fixture’s effects or
manually test individual effects using the control menus.
Automatic effects test
To perform a complete test of all of the fixture ’s effects:
1. Select FIXTURE TEST → TEST ALL and press ENTER to confirm. The
automatic test will run.
2. To stop the test and return to the previous level of the menu structure,
press MENU.
Manual effects tests
You can also manually test individual effects.
To test LED dimming:
1. Select FIXTURE TEST
→ TEST DIMMER and press ENTER.
2. To stop the test and return to the previous level of the menu structure,
press MENU.
To test an individual effect:
1. Select FIXTURE TEST
→ TEST EFFECTS and press ENTER.
2. Use the DOWN and UP buttons to select RED, GREEN, BLUE, CTC,
COLOR (this tests the virtual color wheel effect), or ZOOM. Press
ENTER to confirm your selection. The fixture will now run an automatic
test of the selected effect.
3. Press MENU to exit the test and return to the list of effects.
Fixture information
Power on time
1. Select INFORMATION → POWER ON TIME and press ENTER to
display the total number of hours the fixture has been powered on since
it left the factory.
2. To return to the previous level of the menu structure, press MENU.
LED operating time
1. Select INFORMATION → LED HOURS and press ENTER to display the
total number of hours the LEDs have been activated since the fixture left
the factory.
2. To return to the previous level of the menu structure, press MENU.