background image

14

ZONE II REMOTE CONTROL FUNCTIONS

Zone II Remote Control Functions 

å

Power Off

AVR Selector

ç

AM/FM Tuner Select

Input Selectors

Tuning Up/Down – Fast Play

ƒ

Record/Pause

©

Preset/Track Skip

˙

Disc Skip

î

Volume Up/Down

Play Forward/Reverse/Stop

˚

Mute

NOTE:

The Zone II remote may be used in either

the same room where the DPR is located, or it
may be used in a separate room with an option-
al infrared sensor that is connected to the DPR’s

Multi IR

input jack 

f

. When it is used in the

same room as the DPR, it will control the func-
tions of the DPR or any compatible Harman
Kardon products in that room. When it is used in
a separate room via a sensor connected to the

Multi IR

Jack 

f

, the buttons for power, input

source, volume and mute will control the source

and volume for the second zone, as connected
to the Multi Out Jacks 

. (See page 42 for

complete information on using the Multiroom
system.)

The Zone II remote may be used in either the
same room where the DPR is located, or it may
be used in a separate room with an optional
infrared sensor that is connected to the DPR’s

Multi IR

input jack 

.

å

Power Off:

When used in the room where

the DPR is located, press this button to place the
unit in Standby. When it is used in a remote
room with a sensor that is connected to the

Multi IR

jack 

, this button turns the Multi-

Room system off.

AVR Selector:

Press this button to turn on

the DPR. The input in use when the unit was last
on will be selected.

ç

AM/FM Tuner Select:

Press this button to

select the Tuner as the input to the Multiroom
system. Press it again to change between the
AM and FM bands.

Input Selectors:

When the DPR is off,

press one of these buttons to turn the unit on
and to select a specific input. When the unit is
already in use, pressing one of these buttons will
change the input.

Tuning Up/Down – Fast Play:

These but-

tons may be used to change the frequency of
the tuner. These buttons may also control the
Fast Play or Fast Reverse functions of compatible
Harman Kardon CD, DVD or cassette decks in
the same room, or from a remote room when an
IR link is connected to the DPR.

ƒ

Record/Pause:

Press this button to acti-

vate the Record or Pause function on compatible
Harman Kardon CD, DVD or Cassette Deck
products.

©

Preset Up/Down – Track Skip:

When the

DPR’s tuner is selected as the input source, these
buttons will move up or down through the list of
stations that have been stored in the preset
memory. When a CD or DVD player is selected,
these buttons activate the forward or reverse
track or chapter skip functions.

˙

Disc Skip:

Press this button to change

discs on compatible Harman Kardon CD or DVD
changers.

î

Volume Up/Down:

When used in the

room where the DPR is located, press this button
to raise or lower the volume in that room. When
it is used in a remote room with a sensor that is
connected to the 

Multi IR

Jack 

, this button

will raise or lower the volume in the remote
room.

Play Forward/Reverse/Stop:

Press these

buttons to control compatible Harman Kardon
CD, DVD or cassette players.

˚

Mute:

When used in the room where the

DPR is located, press this button to temporarily
silence the unit. When it is used in a remote
room with a sensor that is connected to the

Multi IR

Jack 

, this button will temporarily

silence the feed to the remote room only. Press
the button again to return to the previous vol-
ume level.

Important Note:

No matter in which room the

Zone II remote is used, as with the main remote
it is important to remember to press the 

Input

Selector

button 

that corresponds to the

unit you wish to operate befor you change the
device to be controlled.

POWER

OFF

MUTE

AVR

AM//FM

VID 1

VID 3

DVD

CD

TAPE

DN

TUNING

PRESET

VOLUME

DISC SKIP

DISC SKIP

UP

DN

UP

VID 4

VID 2

G

A

B

C

D

E

F

H

I

K

J

Содержание DPR 2005



























































Отзывы: