Harman Kardon Digital Lounge 232 EX/240 HD Скачать руководство пользователя страница 16

Страница: 16 / 50

REMOTE CONTROL

Remote Control

Clear Button:

Press to remove the Banner

menu from the screen.

OSD Button:

This button has several func-

tions. In TV mode (press the TV Button

prior

to pressing the Set-up Button) it gives access to
TV OSD menu, in which the video input selection
can be made. In any other mode (press any of the
other source selection buttons

prior

to the Set-up Button) it will access the OSD
menu of the DVD receiver.

IR Transmitter Window:

Point this window

towards the Digital Lounge system when pressing
buttons on the remote to make certain that
infrared commands are properly received.

Aspect Button:

Press this button to scroll

through the available screen formats. The default
setting is Fill All.

Screen Power Buttons:

Use these buttons

to temporarily switch on or off the screen when
listening to audio-only sources. This could be
helpful for instance for scrolling through the con-
tents of MP3 discs or portable hard disk devices.

INFO:

Press for detailed informations on the

disc playing (Video/Audio Bit rate, Movie aspect
ratio and others), and for current player settings
made. Press again to remove information from
screen.

Teletext Buttons:

Press these buttons with

Teletext activated (by button

) to select the

different Teletext functions. Pressing the 100-
Button will always call up the main Teletext page.
Pressing the Sub Page Button consecutively will
scroll through the available sub pages of a page.

Picture in Picture Button:

Press this button

once to activate the Picture in Picture function.
Press it again to activate the picture out of picture
function (split screen).

Note:

When Picture in Picture is activated the

main picture can be selected by the

numeric

buttons

(when TV tuner is source) and the

secondary picture by the

PRESET

Buttons

while pressing the PC or VIDEO button will toggle
through all available PC and Video sources as
secondary picture.

Mode Button:

This button enables you to

switch the remote to another mode so that it
operates another device without selecting it as
the source. Each press of the Mode button
changes the remote’s mode in this order: TV,
DVD, VIDEO, PC, HDMI 1, HDMI 2 and HDMI 3
and then back to TV again. The corresponding
Source Selector will light to indicate the mode.

Important Note:

When toggling through the

resolution modes by pressing this button repeat-
edly be sure to have your screen connected via
HDMI or Component cable, otherwise you will
not see a picture with the progressive or the HD
modes. Note that via HDMI the Standard inter-
laced signals (480/576i) will not appear.

Important notes.

The large system remote control contains several
buttons that have more than one function. The

Set-up

Button

is a good example. It can

both access the set-up menu of the TV and the
set-up menu of the DVD receiver. The final func-
tion of the button depends on the button pressed
prior to pressing the Set-up Button. Pressing the
TV, VIDEO or PC

Source Selector

Button

before the

Set-up

Button will access the TV

Set-up Menu. Pressing any of the other

Source

Selector

Buttons

will access the Set-up

Menu of the DVD receiver.

There are two ways to switch on the system. For
those sources that require the screen to be
switched on (TV, DVD, VIDEO or PC), pressing
one of the