Harman Kardon AVR 745 Скачать руководство пользователя страница 53

Страница: 53 / 64

ADVANCED FEATURES

ENGLISH

The AVR is equipped with a number of advanced
features that add extra flexibility to the unit’s
operation. While it is not necessary to use these
features to operate the unit, they provide addi-
tional options that you may wish to use.

To change a setting from its factory default, you
will use the

ADVANCED SELECT

menu.

First press the TC 30's

Device Button

, then

press the

Screen Button

next to

A V

RECEIVER

in the display and then press the

Menu Button

. With the ZR 10 remote,

press the

OSD Button

to call up the

MAIN MENU

(Figure 1). Next, press the

⁄

Navigation Buttons

so that the cursor

is next to

ADVANCED

; then press the

OK/Enter Button

on the TC 30 or the

Set

Button

on the ZR 10. When the

ADVANCED SELECT

menu (Figure 31)

appears, follow the instructions shown below to
make any needed configuration adjustments.

Figure 31

Front-Panel-Display Fade

In normal operation, the front-panel displays and
indicators remain on at full brightness, although
you may also dim them or turn them off as
shown on page 51. As an additional option, you
may also set the AVR so that the displays are on
whenever a button is pressed on the front panel
or remote, but then fade out after a set period of
time.

With the

ADVANCED SELECT

menu on

your video display, press the

⁄

Navigation

Button

so that the

➞

cursor is pointed

to the

VFD FADE TIME OUT

line. Next,

press the

‹

›

Navigation Button

that the amount of time that you wish the dis-
plays to fade out after a button is pressed is
shown.

Once this time is set and the unit returned to
normal operation, the displays will remain on for
the time period selected whenever a button is
pressed on the front panel or remote. After that
time they will gradually fade out, with the excep-
tion of the lighting surrounding the

Standby/On

Switch

, which remains on to remind you

that the AVR is turned on. Note that if the dis-
plays have been turned completely off using the
Dim Button, as shown on page 51, the Fade
function will not operate.

If you wish to make adjustments to other items
on the

ADVANCED SELECT

menu, press

the

⁄

Navigation Button

to place

the

➞

cursor next to the desired item, or place

the

➞

cursor next to the

BACK T O

MASTER MENU

line and press the

OK/Enter

Button

on the TC 30 or the

Set Button

on the ZR 10 to make an adjustment to

another menu. If you have completed all adjust-
ments, press the

Menu Button

or the

OSD

Button

to exit the menu system.

Display Brightness

The AVR’s front panel

Main Information

Display

is set at a default brightness level

that is sufficient for viewing in a normally lit
room. However, in some home theater installa-
tions, you may wish to occasionally lower the
brightness of the display, or turn it off completely.

To change the brightness setting, at the

ADVANCED SELECT

menu, make certain

that the on-screen

➞

cursor is next to the

VFD

line, and press the

›

Button

until the

desired brightness level is highlighted in the
video display. When

FULL

is highlighted, the

display is at its normal brightness. When

HALF

is highlighted, the display is at half the normal
brightness level. When

OFF

is highlighted, all of

the indicators in the

Main Information

Display

will go dark. Note, however, that the

Power Indicator

, will always remain lit to

remind you that the unit is turned on.

If you wish to make other adjustments in the
menu, press the

⁄

Buttons

until the

on-screen

➞

cursor is next to the desired setting

or the

BACK T O MASTER MENU

line and

press the

OK/Enter Button

on the TC 30

or the

Set Button

on the ZR 10. If you have

no other adjustments to make, press the

Menu

Button

or the

OSD Button

to exit the

menu system.

Turn On Volume Level

As is the case with most audio/video receivers,
when the AVR is turned on, it will always return
to the volume setting in effect when the unit was
turned off. However, you may prefer to always
have the AVR turn on at a specific setting,
regardless of what was last in use when the unit
was turned off. To change the default condition
so that the same volume level is always used at
turn-on, you will need to make an adjustment in
the

ADVANCED SELECT

menu.

At the

ADVANCED SELECT

menu make

certain that the on-screen

➞

cursor is next to the

VOLUME DEFAULT

line by pressing the

⁄

buttons

as needed. Next, press the

➞

button

so that the word

O N

is high-

lighted in the video display. Next, press the

button

once so that the on-screen

➞

cursor is next to the

DEFAULT VOL SET

line. To set the desired turn-on volume, press the

‹

›

buttons

or hold them pressed until

the desired volume level is shown on the

DEFAULT VOL SET

line. Note that this set-

ting may NOT be made with the regular volume
controls.

NOTE

: Since the setting for the turn-on volume

cannot be heard while the setting is being made,
you may wish to determine the setting before
making the adjustment. To do this, listen to any
source and adjust the volume to the desired level
using the regular volume controls

. When

the desired volume level to be used at turn-on is
reached, make a note of the setting as it appears
in the lower third of the video screen or in the

Main Information Display

A typical volume level will appear as a negative
number such as -25dB. When making the
adjustment, use the

‹

›

buttons

enter this setting.

Unlike some of the other adjustments in this
menu, the turn-on volume default will remain in
effect even when the unit is turned off comple-
tely, unless it is changed or turned off in this
menu.

If you wish to make other adjustments in the
menu, press the

⁄

Buttons

until the

on-screen

➞

cursor is next to the desired setting

or the

BACK T O MASTER MENU

line and

press the

OK/Enter Button