Harman Kardon AVR 525, Руководство пользователя

Страница: 26 / 60

SYSTEM CONFIGURATION SYSTEM CONFIGURATION
26 SYSTEM CONFIGURATION 26 SYSTEM CONFIGURATION
NOTE: Output level adjustment is not available for the
VMAx or Surround Off modes.
Additional Input Adjustments
After one input has been adjusted for Surround mode,
digital input (if any), speaker type, and output levels,
go back to the
IN/OUT SETUP line on the
MASTER MENU
(Figure 1) and enter the set-
tings for each input that you will use. In most cases,
only the digital input and surround mode will be differ-
ent from one input to the next, while the speaker type,
crossover frequency, Night mode and output level
settings will usually be the same and may be quickly
entered by entering the same data used for the
original input.
When all settings and adjustments have been made,
press the
OSD Button
v
to return to normal oper-
ation of the AVR.
Once the settings outlined on the previous pages have
been made, the AVR 525 is ready for operation. While
there are some additional settings to be made, these
are best done after you have had an opportunity to lis-
ten to a variety of sources and different kinds of pro-
gram material. These advanced settings are described
on pages 34 to 35 of this manual. In addition, any of
the settings made in the initial configuration of the unit
may be changed at any time. As you add new or dif-
ferent sources or speakers, or if you wish to change a
setting to better reflect your listening taste, simply fol-
low the instructions for changing the settings for that
parameter as shown in this section.
Having completed the setup and configuration process
for your AVR 525, you are about to experience the
finest in music and home theater listening. Enjoy!