Harman Kardon AVR 525 Скачать руководство пользователя

Страница: 40 / 60

40 PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE

Erasing Macro Commands

To remove the commands that have been pro-
grammed into one of the Macro buttons, follow these
steps:

1. Press the

Mute Button

and the

Macro

Button

that contains the commands you

wish to erase.

2. The

Program/SPL Indicator

will flash

amber, and the LED under the

AVR Selector

will turn red.

3. Within ten seconds, press the

Surround Mode

Selector/Channel Down Button

4. The red LED under the

AVR Selector

will

go out, and the

Program/SPL Indicator

will turn green and flash three times before it
goes out.

5. When the

Program/SPL Indicator

goes

out, the Macro has been erased.

Figure 12

Programmed Device Functions

Once the AVR 525’s remote has been programmed for
the codes of other devices, press the appropriate

Input

Selector

to change the remote from controlling

the AVR 525 to controlling the additional product.
When you press any one of the selectors, it will briefly
flash in red to indicate that you have changed the device
being controlled.

When operating a device other than the AVR 525, the
controls may not correspond exactly to the function
printed on the remote or button. Some commands,
such as the volume control, are the same as they are
with the AVR 525. Other buttons will change their
function so that they correspond to a secondary label
on the remote. For example, the Sleep and Surround
mode selector buttons also function as the Channel Up
and Channel Down buttons when operating most TV
sets, VCRs or cable boxes. The Channel Up/Down
indication is printed directly on the remote. For many
standard CD players, cassette decks, VCRs and DVD
functions, the standard function icons are printed on
top of the buttons.

For some products, however, the function of a particu-
lar button does not follow the command printed on
the remote. In order to see which function a button
controls, consult the Function List tables on pages 42
and 43. To use those tables, first check the type of
device being controlled (e.g., TV, VCR). Next, look at
the remote control diagram in Figure 12. Note that
each button has a number on it.

To find out what function a particular button has for
a specific device, find the button number on the
Function List and then look in the column for the device
you are controlling. For example, button number 45
is the Direct button for the AVR 525, but it is the
“Favorite” button for many cable television boxes
and satellite receivers. Button number 31 is the Delay
button for the AVR 525, but the Open/Close button for
CD players.

NOTE:

The numbers used to describe the button

functions in Figure 12 for the purposes of describing
how a button operates are a different set of numbers
than those used in the rest of this manual to describe
the button functions for the AVR 525.

Notes on Using the AVR 525 Remote With Other
Devices.

• Manufacturers may use different code sets for the

same product category. For that reason, it is impor-
tant that you check to see whether the code set you
have entered operates as many controls as possible.
If it appears that only a few functions operate, check
to see whether another code set will work with more
buttons.

• When a button is pressed on the AVR 525 remote,

the red light under the

Input Selector

for the

product being operated should flash briefly. If the
Device Control Selector flashes for some but not all
buttons for a particular product, it does NOT indi-
cate a problem with the remote but rather that no
function is programmed for the button being
pushed.

Volume Punch-Through

The AVR 525’s remote may be programmed to oper-
ate the

Volume Control

and

Mute

func-

tions of either the TV or the AVR 525 in conjunction
with any of the devices controlled by the remote. For
example, since the AVR 525 will likely be used as the
sound system for TV viewing, you may wish to have
the AVR 525’s volume activated, although the remote
is set to run the TV. Either the AVR 525 or TV volume
control may be associated with any of the remote’s
devices. To program the remote for Volume Punch-
Through, follow these steps:

1. Press the

Input Selector

for the unit you wish

to have associated with the volume control and the

Mute Button

at the same time until the red

light appears under the

Input Selector

; the

Program/SPL Indicator

will flash amber.

2. Press the

Volume Up Button

; the

Program/

SPL Indicator

will stop flashing and stay amber.

3. Press either the

AVR Selector

or the

Input

Selector

, depending on which system’s

volume control you wish to have attached for the
punch-through mode. The

Program/SPL Indicator

will blink green three times and then go out to

confirm the data entry.

Example:

To have the AVR 525’s volume control

activated even though the remote is set to control
the TV, first press the

Video/TV Input Selector

and the

Mute Button

at the same time.

Next, press the

Volume Up Button

, followed

by the

AVR Selector

NOTE:

Should you wish to return the remote to the

original configuration after entering a Volume Punch-
Through, you will need to repeat the steps shown
above. However, press the same Input Selector in
Steps 1 and 3.

Channel Control Punch-Through

The AVR 525’s remote may be programmed to operate
so that the channel control function for either the TV,
cable or satellite receiver used in your system may be
used in conjunction with one of the other devices con-
trolled by the remote. For example, while using and con-
trolling the VCR, you may wish to change channels on a
cable box or satellite receiver without having to change