Harman Kardon AVR 525 Скачать руководство пользователя

Страница: 39 / 60

PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE 39

4. Press the button on the AVR 525 remote that you

wish to program. The

Program/SPL Indicator

will stop flashing.

5. Within five seconds, press and hold the button on

the original remote that you wish to “teach” into
the AVR 525 remote. When the

Program/SPL

Indicator

turns green three times, release

the button. The Program Indicator will then begin
to flash amber again.

NOTE

: If the

Program/SPL Indicator

turns

red during Step 5 or 6, the programming was not
successful. Repeat the steps to see whether the
code will “take.”

6. Repeat Steps 4 though 6 for each button on the

source remote that you wish to transfer to the
AVR 525 remote.

7. Once all codes have been transferred from the

original source remote to the AVR 525 remote,
press the

Learn Button

8. Repeat Steps 1 through 7 for any additional

remotes you wish to “teach” into the AVR 525
remote.

Erasing Learned Codes

The AVR 525’s remote allows you to remove or erase,
the code learned into a single button for a single device,
to remove or erase the code set for all the codes that
have been programmed into specific device buttons, or
to erase all commands that have been learned to all
devices.

To erase a single learned code from within a single
device’s settings, follow these steps:

1. Press and hold both the

Input Selector

within which the individual button to be erased

has been programmed and the

Learn Button

2. When the red LED under the

Input Selector

turns

red and the

Program/SPL Indicator

flashes

amber, release the buttons.

3. Press and release the

Input Selector

efg

again for the device within which the individual button
to be erased has been programmed.

4. Press the

7 Button

four times.

5. Press and release the individual button for which the

code is to be erased. The

Program/SPL Indicator

will blink green two times and then return to

amber.

6. To erase other buttons within the same device, press

them as described in Step 5.

7. When all buttons to be erased have been pressed,

press the

Learn Button

to complete the

process.

To erase all codes within a single device, follow these
steps:

1. Press and hold both the

Input Selector

efg

for which you wish to erase the codes

and the

Learn Button

2. When the red LED under the

Input Selector

turns

red and the

Program/SPL Indicator

flashes

amber, release the buttons.

3. Press and release the

Input Selector

efg

again for the device whose codes you wish to erase.

4. Press the 8 button

four times.

5. The

Program/SPL Indicator

will turn off and

the red light under the

Input Selector

will flash on

and off once to indicate that the codes have been
erased.

To erase all codes that have been programmed to all
devices in the remote, follow these steps:

1. Press any

Input Selector

efg

for which

you wish to erase the codes and also the

Learn

Button

2. When the red LED under the

Input Selector

turns

red and the

Program/SPL Indicator

flashes

amber, release the buttons.

3. Press and release the

Input Selector

efg

again for the device whose codes you wish to erase.

4. Press the

9 Button

four times.

5. The

Program/SPL Indicator

will turn off and

the red light under the

Input Selector

will flash on

and off once to indicate that the codes have been
erased.

Macro Programming

Macros enable you to easily repeat frequently used
combinations of commands with the press of a single
button on the AVR 525’s remote control. Once pro-
grammed, a macro will send out up to 19 different
remote codes in a predetermined sequential order
enabling you to automate the process of turning on
your system, changing devices, or other common
tasks. The AVR 525’s remote can store up to five sep-
arate macro command sequences: one that is
associated with the

Power On Button

and four

more that are accessed by pressing the

Macro

Buttons

1. Press the

Mute Button

and the

Macro

Button

to be programmed or the

Power On

Button

at the same time. An

Input Selector

will light red, and the

Program/SPL Indicator

will flash amber.

2. Enter the steps for the macro sequence by press-

ing the button for the actual command step.
Although the macro may contain up to 19 steps,
each button press, including those used to change
devices, counts as a step. The

Program/SPL

Indicator

will flash green to confirm each

button press as you enter commands.

NOTE:

While entering commands for Power On/Off of

any device during a macro sequence, press the

Mute

Button

. DO NOT press the actual Power button.

3. When all the steps have been entered, press the

Sleep Button