ENGLISH
43
When selecting the DOLBY PLII MUSIC
• You can adjust the various surround parameters for optimum surround effect.
NOTE: The parameter settings are valid only when listening in Dolby Pro Logic II Music mode.
When selecting the BASS BOOST
• The bass boost function enhances the bass sound for small speakers(i.e., speakers set to “S”(Small)) that are
incapable of reproducing low frequencies.
NOTE: The bass boost setting is valid only when playing music files from the USB device.
�
When selecting the "PANO (Panorama)" mode
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging. Select "OFF" or "ON"(default
value:OFF).
�
When selecting the "C. WIDTH (Center width)" control
This adjusts the center image so it may be heard only from
the center speaker, only from the left/right speakers as a
phantom image, or from all three front speakers to varying
degrees. The control can be set in 8 steps from 0 to 7
(default value : 3).
�
When selecting the "DIMEN (Dimension)" control
This gradually adjusts the soundfield either towards the
front or towards the rear. The control can be set in 7 steps
from -3 to +3 (default value : 0).
1.
Press the
▲
/
▼
buttons to select the "PLII MSC", then
press the OK button.
2.
Press the
▲
/
▼
buttons to select the desired parameter.
3.
Press the
◀
/
▶
buttons to adjust the selected
parameter as desired.
4.
Repeat the above steps 2 and 3 to adjust other parameters.
OFF : To turn off the bass boost for small speakers.
�
ON : To enhance the bass sound.
1.
Press the
▲
/
▼
buttons to select the "BASS BST",
then press the OK button.
2.
Press the
◀
/
▶
buttons to select the desired mode.
AVR-134 2008.12.1 10:31 AM 페이지 43
