Harman Kardon AVR 134, Руководство пользователя

Страница: 16 / 45

ENGLISH
16
Operations
LISTENING TO A PROGRAM SOURCE
Before operation
• Enter the standby mode.
• The STANDBY indicator lights up orange.
This means that the receiver is not
disconnected from the AC mains and a small
amount of current is retained to support the
operation readiness.
• To switch the power off, push the MAIN POWER
switch again.
• Then the power is cut off and the STANDBY
indicator goes off.
• Each time the SYSTEM POWER CONTROL button on the
front panel is pressed, the receiver is turned on to enter the
operating mode or off to enter the standby mode.
• On the remote control, press the POWER ON button to
enter the operating mode or press the POWER OFF button
to enter the standby mode.
• In the standby mode, if the INPUT SELECTOR button is
pressed, the receiver is turned on automatically and the
desired input is selected.
• Each time this button is pressed, the speakers are switched
on or off as follows:
→ SPK : A → SPK : B → SPK : A+B → SPK : OFF
• When using the headphone for private listening, switch off
the A and B speakers.
• Each time the “Source ∧ / ∨ ” buttons on the front panel is
pressed, the input source changes as follows:
� Tuner � HDMI 1 � HDMI 2 � HDMI 3 � TAPE � 6 CH DIR �
(Frequency display)
�
CD
�
DVD
�
VIDEO 3
�
VIDEO 2
�
VIDEO 1
�
USB IN
�
• Each time the “HDMI 2/3” button on the remote control is
pressed, the input source changes as follows:
HDMI 2 � HDMI 3
• Each time the “AM/FM” button is pressed, the band
changes as follows:
→ FM ST → FM MONO → AM
• When the 6CH DIRECT INPUT is selected, 6 separate
analog signals from the component connected to this input
pass through the volume circuits only and can be heard
from your speakers.
• These analog signals can be heard only, not recorded.
or
1.
In the standby mode, turn the power on.
2.
Switch the desired speakers on.
3.
Select the desired input source.
NOTES :
• Before operating this receiver with the supplied remote control, refer to “Remote Control Functions” on page 12.
• Before operating this receiver, first set this unit as desired for optimum performance, doing the system setup procedures. (For
details, refer to "System Setup" on page 32.)
• After pressing the DVD button on the remote control, press the AVR button on the remote control to operate the AVR
functions with it.
AVR-134 2008.12.1 10:31 AM 페이지 16