Harken Top-Crank LokHead Rigging Winch 500, Инструкция по эксплуатации

Страница: 46 / 330

46 22/06/2023
WARNING!
• In case of difficulty when lowering the load, unwind the rope, and reduce the number of windings
to a minimum of 2, in order to obtain the optimal configuration. Do not fully unwind the rope from
the Winch until the tension on the rope has been completely eliminated.
• During lowering operations it is vital to check the free end of the rope, to reduce the risk of serious
injury or death. Tie a knot in the free end of the rope to prevent it from coming out of the Winch.
• It is vital that the lowering of load is always under control as loss of control can be difficult to
recover.
• Be careful during or after prolonged lowering of the loads, as the Winch may overheat and damage
the rope.
The Top-Crank LokHead Rigging Winch 500 and its accessories have a useful life of 30 years from
the date of construction, provided there are no causes that may determine their withdrawal and
provided that all the required periodic inspections and any necessary maintenance are carried out,
with the results recorded in the Inspections/Repairs log.
The date of construction is indicated in the serial number (present on the Winch plate), on the Winch
plate and on the declaration of conformity.
Winch serial number:
S XXXXX
XXXXXXXXX
last two numbers of the year of production of the machine (e.g. 23 = year 2023).
WARNING!
For the duration of the rope and the lifting accessories used, refer to the documentation and information
provided by the manufacturer of the devices.
After any maintenance job the Winch must be tested to make sure it works correctly.
Any maintenance job must be performed by skilled personnel trained on the procedure to operate
properly and safely on the machine.
18. USEFUL LIFE
19. MAINTENANCE