Harken R27LS, Инструкция по эксплуатации, Страница: 7 / 86

26/01/22 ENGLISH 7
R27LS RAIL
The anodized aluminium R27LS rail (INR27.LS) must be fastened to a supporting structure using suitable
brackets. A low friction trolley, is to be installed to the rail, providing a mobile anchorage point. This assembly
includes a rigid fall arrest system. By installing and using this system correctly, the risk of the operators falling
whilst working at height can be eliminated or significantly reduced.
Furthermore, the R27LS rail in horizontal installation (0°±5°) can be used as a Rope Access Anchorage
System, to provide a safe anchorage for twin rope working (rope access & work positioning), with good
anchor mobility under load.
COMPONENTS
The R27LS rail must be used with the following components:
Rail
THE RAIL
Extruded anodized aluminium rail of 3m of length.
The rail can be supplied also bent. For more details,
refer to the Bent Rail chapter.
INR27.LS
Coloured rail
The standard rail is supplied in (CLEAR) anodized aluminium colour. Aluminium rail, brackets and connectors can
be supplied on request, powder coating or anodized coloured.
Stainless steel brackets and connectors can be supplied powder coating coloured.
For more information, contact Harken.
Bent rail with a minimum radius of curvature of 15m (valid for all trolleys)
The straight rail can be installed on bent surfaces, which have a minimum bending radius of 15m.
The bending rail can be done manually in the 3 directions during the installation procedure and to do this, it is
necessary to install the rail using a minimum of four brackets with a maximum distance of 1m between a bracket
and another. See paragraph Installation Layout – bent rail 1, 2 and 3.
1
2
3