23
LIGHTING THE BBQ
WARNING: OPEN HOOD BEFORE IGNITING BBQ.
OPEN LID BEFORE IGNITING SIDE BURNER.
DO NOT CLOSE SIDE BURNER LID WHEN IN OPERATION.
Automatic Ignition
1. Make sure the valve, the hose and the regulator are connected correctly as per the assembly
instructions.
2. Open the gas control valve on the gas cylinder. Check with the use of soapy water for any
gas leakage between the bottle, the regulator and the gas valve. (Explained on page 21)
3. To ignite the burner press in the control knob fully and turn anti-clockwise until a click is
heard. Check if the burner is alight. If the burner has not lit, repeat this process.
4. If the burner has not lit after 3 attempts, turn off the gas tap, wait 5 minutes and then repeat
step 3. If the BBQ still fails to light, please refer to the manual ignition instructions below.
5. When the burner is lit, adjust the heat by turning the knob to the High or Low position.
6. After use, turn all control knobs to the OFF setting and turn off the gas control valve at the
cylinder.
