13
STEP 15 FITTING RIGHT HAND SIDE SHELF WITH BURNER
Parts Required
B
Right hand side shelf
with burner
— 2pcs screws are pre-assembled on BBQ body and they
should be screwed out 2-3mm for assembly as per figure 18.
— Slide side burner table onto these screws but do not
tighten at this stage.
— Fix the shelf from the inside of the BBQ body with 3pcs ¼" screw and 3pcs M6 washers
(from the hardware pack) as per figure 19.
— Fix front of shelf to BBQ body with 2pcs 5/32” screws and 2pcs M4 washers (from the
hardware pack) as per figure 20. Tighten all screws.
Figure 18
Figure 19
LOOSEN 2PCS PRE ASSEMBLED
SCREWS ON BBQ BODY (A)
View from under side Right Hand Shelf with Burner (B)
3 X ¼" SCREWS AND
M6 WASHERS
RIGHT HAND SIDE SHELF
WITH BURNER (B)
Figure 20
2PCS 5/32" SCREWS AND M4 WASHERS
FROM HARDWARE PACK TO FIX FRONT
PANEL OF SIDE BURNER TO FRONT
PANEL ON BBQ BODY AND HOOD (A)
