12
STEP 13 FITTING CABINET DOORS
— Locate the bottom fixed pin for each door. Insert the pin into the hole at the corners of the
cabinet base.
— Depress spring pivot in top of each door and locate into the hole in the cabinet top rail as per
figure 15.
Figure 15
STEP 14 FITTING BBQ BODY AND HOOD
Parts Required
A
BBQ Body and Hood
— Lower onto cabinet. Place between the tabs on the
back cabinet legs and the tabs on the front of the left and
right hand side panels as per figure 16.
— By using 4pcs ¼” screws (from the hardware pack) screw through the holes in the tabs and
tighten as per figure 17.
Figure 17
SPRING PIVOT
FIXED PIN
Figure 16
Note - Ensure Hose
and Regulator are free
from the underside of
the BBQ Body.
BBQ BODY AND HOOD (A)
LEG TABS
SIDE PANEL TABS
