19
B.
THE GAS SYSTEM
1. GAS AND REGULATOR INFORMATION
This BBQ is designed for propane (LPG) gas use only. Gas bottles with a "POL"
low pressure connection are to be used with this BBQ. Bottle sizes of 4.5 - 9 kg are
recommended for use with this BBQ. Suitable regulators must have an outlet pressure of
2.75 kPa. You must have the proper regulator and bottle in order for the BBQ to operate
safely and efficiently. Ensure that a 100% propane (LPG) refillable gas cylinder currently
certified to Australian Standard AS2030.1:2009 is used. Do not use disposable gas
cylinders.
PLEASE NOTE THE HOSE AND REGULATOR SUPPLIED WITH THIS BBQ ARE OF AN
APPROVED TYPE AND ARE SPECIFICALLY DESIGNED FOR USE WITH YOUR BBQ.
2. CONNECTING THE HOSE AND REGULATOR TO THE GAS BOTTLE
— Only use the hose assembly supplied with this appliance for direct connection to the
cylinder – DO NOT USE ADAPTORS. Do not use any other hose assembly. Check the
gas hose for damage or signs of abrasion before each use.
— Keep the hose clear of sharp edges and hot surfaces.
— Avoid twisting or kinking the flexible hose.
— If damaged, do not use the hose and replace it immediately. If there is any doubt,
contact the Customer Service Helpline on 1300 799 787.
— Make sure all BBQ control knobs are in the off position. Connect the regulator to the gas
cylinder by inserting the regulator connection into the gas bottle outlet. This is tightened
by turning in an anti clockwise motion.
— Firmly hand tighten and then be sure to check for leaks at all gas connections.
— Please note that the hose is already fitted to the valve on the underside of the BBQ.
You do not have to adjust this connection but should leak test this once the hose and
regulator are connected to the gas cylinder.
0.88"-14NGO LH-FXT THREAD
5/8" - 18 UNF
THREAD
