7
ASSEMBLY INSTRUCTIONS
Tools required: Phillips Head Screwdriver
Step 1
– Install Handle
Remove two screws from the back of the appliance. Align
handle with the two holes on the back. Install the handle by
fastening a screw into each hole & tighten.
Step 2
– Install Wood Chip Chute Handle
Remove two screws from wood chip chute handle. Align
handle with two holes on wood chipe chute. Install by
fastening screw into handle and tighten.
Step 2
– Install Wood Chip Tray
Slide the wood chip tray into the corresponding supports,
insuring that the tray is placed to completely enclose the
heating element with the two surfaces of the tray.
Step 3
– Drip Pan Placement
Set the Drip Pan on the floor of the inside of the smoker,
below the wood chip tray. The raised edges of the pan
should face up in order to catch any juices that may drip
from the food overhead.
Be sure that the pan does not obstruct the smoker door
from closing.
2.0