Hardi NAVIGATOR EAGLE 3000, Инструкция

Страница: 89 / 178

5 - Operation
89
Spray Boom
Safety Info
Keep the spray boom in folded position while driving outside the field. Park the sprayer and tractor on level ground before
using the folding/unfolding functions.
Failure to comply will damage the boom and cause dangerous situations to people and the surroundings.
€
DANGER! Before unfolding the boom it is important to connect the sprayer to the tractor’s hitch point to prevent
overbalancing of the sprayer. Activate the tractor’s handbrake.
€
DANGER! When folding or unfolding the boom, make sure that no persons or objects are within the operating area
of the boom.
€
DANGER! Always follow the guidelines listed below when driving in areas with overhead power lines:
Keep from using the folding/unfolding functions in areas with overhead
power lines. Unintended boom movements may cause contact with
overhead power lines, causing a risk of fatal accidents.
μ
ATTENTION! A label (HARDI item no. 978448) follows the sprayer.
This label must be placed in the cabin visible from the operator’s
seat.
Manoeuvring of the boom (Y-version)
The SPB/SPC boom with hydraulic Y-version is operated as follows:
1.
Activate the single acting hydraulic outlet to raise the boom and release it from the transport brackets.
2.
Activate the double acting hydraulic outlet to unfold the boom. Both wings will now unfold simultaneously.
3.
When the boom is completely unfolded, it can be raised or lowered to the desired spray height by activating the single
acting hydraulic outlet.
4.
Before attempting to fold the boom back into transport position, it must be raised all the way to the top by activating
the single acting outlet. This will enable the rear cylinder transport lock.
5.
The boom is folded by activating the double acting outlet in the opposite direction as for unfolding the boom. The
boom can now be lowered into the transport brackets.
6.
The rear cylinder transport lock will automatically engage when lowering the boom, after it has been raised all the way
to the top. To disengage the rear transport lock, simply raise the boom back up a few centimetres and then lower it
again.
μ
ATTENTION! Only unfold and fold the boom on level ground.
±
WARNING! Ensure that the pendulum lock is locked before using the fold functions.
±
WARNING! Ensure that the rear cylinder transport lock is properly engaged before transport.
Night Spraying Light
The night spraying light is activated on the SetBox. Use the A and B switches to activate the lights.
If you have a controller model HC 5500, the night spraying light may be activated using other switches depending on the
equipment setup for the sprayer.
If traffic lights are fitted, the work lights will only work, when the traffic light is on.