manualshive.com logo in svg

Hardi NAVIGATOR EAGLE 3000, Инструкция

Поделиться
Скачать
Hardi NAVIGATOR EAGLE 3000 Скачать руководство пользователя страница 153

6 - Maintenance

153

8.

Apply a thin layer of anti-corrosion oil (e.g. SHELL ENSIS FLUID, CASTROL RUSTILO or similar) on all metal parts. Avoid 
oil on rubber parts, hoses and tyres.

9.

Fold the boom into transport position and relieve the pressure from all hydraulic functions.

10.

All unplugged electric plugs and sockets are to be stored in a dry plastic bag to protect them against moisture, dirt 
and corrosion.

11.

Remove the control boxes and computer display from the tractor. Store them dry and clean (indoor) in a non- 
condensing environment.

12.

Wipe hydraulic snap couplers clean and fit the dust caps.

13.

Apply grease to all hydraulic ram piston rods, not fully retracted in the housing, to protect against corrosion.

14.

Place the wheel axle on jack stands to prevent moisture damage and deformation of the tyres. Apply tyre blacking to 
the tyre walls to preserve the rubber.

15.

Drain the air brake tank for condensed water.

16.

Cover the sprayer with a tarpaulin to protect against dust. Ensure ventilation to prevent condensation.

Содержание NAVIGATOR EAGLE 3000



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды