manualshive.com logo in svg

Hardi NAVIGATOR EAGLE 3000, Инструкция

Поделиться
Скачать
Hardi NAVIGATOR EAGLE 3000 Скачать руководство пользователя страница 103

5 - Operation

103

Liquid Fertilizer

Spraying Pressure

If you are spraying with liquid fertilizer instead of pesticides, the spraying pressure must be increased in comparison to 
pesticide spraying to get the desired output (l/ha).

The specific gravity for liquid fertilizer is normally higher than for water and spray liquids - so to get the correct output (l/ha), 
the spraying pressure must be adjusted.

Example:
Nozzle output is 2.40 l/Min at 3.0 bar pressure. Specific gravity of liquid fertilizer is 1.20 g/cm³.

Multiply the pressure value with the specific gravity value: 3.0 x 1.20 = 3.6.

The adjusted pressure is now 3.6 bar for spraying the liquid fertilizer.

In the table below, adjusted pressure values can be found for different specific gravities of liquid fertilizers.

μ

ATTENTION! Pressure values below 1.5 bar or above 5.0 bar are considered to be out of range for the nozzles.

÷

NOTE! Find the specific gravity for your liquid fertilizer on the packaging or on the material safety data sheet (MSDS) 
included.

TankGauge in MainTank

When the MainTank is filled with liquid fertilizers that has higher specific gravity, the TankGauge may show incorrect values. 
Therefore the specific gravity for the TankGauge need to be corrected.

1.

In the controller, go to menu [3.5.1 Adjustment of specific gravity].

2.

Set specific gravity.

3.

Press Enter to confirm.

Additional Information

See the other book delivered from HARDI - Spray Technique - to get further information about:

•

Calibration of the sprayer

•

Nozzle Choice

•

Nozzle Wear

•

Spray Distribution

•

Spray Pressure

•

Water Volume Rates

•

Weather Influence on Spraying

•

Useful Formulae 

For optional equipment - see other books delivered or contact HARDI.

Specific gravity (g/cm³) for Liquid Fertilizer

1.10

1.15

1.20

1.30

1.40

Calibrated Pressure (bar) when Spraying with 

Pesticides

Adjusted Pressure (bar) when Spraying with Liquid Fertilizer

1.5

1.7

1.7

1.8

2.0

2.1

2.0

2.2

2.3

2.4

2.6

2.8

2.5

2.8

2.9

3.0

3.3

3.5

3.0

3.3

3.5

3.6

3.9

4.2

3.5

3.9

4.0

4.2

4.6

4.9

4.0

4.4

4.6

4.8

5.2

5.6

4.5

5.0

5.2

5.4

5.9

6.3

5.0

5.5

5.8

6.0

6.5

7.0

Содержание NAVIGATOR EAGLE 3000



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды