manualshive.com logo in svg

Hardi NAVIGATOR EAGLE 3000, Инструкция

Поделиться
Скачать
Hardi NAVIGATOR EAGLE 3000 Скачать руководство пользователя страница 124

6 - Maintenance

124

10 Hours Service - EasyCleanFilter

This filter has a clogging indicator, but even if this indicator does not 
show clogging, the filter mostly needs cleaning every 10 hours.

÷

NOTE! The controller will show a service interval message, when 
it is time for cleaning the filter.

Servicing the Filter

1.

Turn the filter lid counter-clockwise to open it.

2.

Remove lid and filter from the filter housing.

3.

Separate filter element from lid/filter guide by turning locks (A) 
outwards.

4.

Clean filter and if necessary clean the housing for larger impurities.

To Reassemble

1.

Grease the O-ring on the filter lid.

2.

Press the filter onto the filter guide/lid. Make sure that it has caught 
the guide. Locks (A) are turned inwards.

3.

Reassemble filter/filter lid into the housing. Make sure that it has 
caught the guide in the bottom of the housing.

4.

Turn the filter lid clockwise to close it.

±

WARNING! Always wear protective clothing and gloves before 
servicing the filter!

μ

ATTENTION! If you have difficulties with opening the filter, there is 
another way to handle it. 

See “Emergency Operation - EasyCleanFilter” on page 158.

Содержание NAVIGATOR EAGLE 3000



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды