Hardi HC 5500 SPRAY BOX III, Инструкция

Страница: 63 / 84

8 - Menu 4, Toolbox
63
Menu 4.6 Speed simulation
How to use speed simulation
Speed may be simulated for several reasons as described in the sections below.
When setting the simulated speed in this menu, the value will remain valid, until the Controller is restarted or the value is set
to “00”.
Troubleshooting
If you are getting an incorrect spraying output, or there is too much
deviation in the output or in other equipment settings, the driving
speed sensor may be providing incorrect signals for several reasons.
If the need for troubleshooting has occurred, you can simulate the
driving speed by setting the speed value between 0-9 km/h in this
menu. This way you can exclude any speed sensor faults at this time.
If you are still getting incorrect spray output or settings, you must
continue your troubleshooting elsewhere on the sprayer.
Verification
The speed simulation is helpful, when calculating the boom flow and pressure after having chosen the desired spray output.
Service
When carrying out a service check of the sprayer, or after a longer period of standstill, the speed can be simulated to avoid
having to drive around in the field to check the equipment settings for spraying.
SPEED SIMULATION
Value
00 km/h
4.6