9
Reading revolutions
In the revolutions display, P.T.O. revolutions
can be read. For selection see “Menus, [
0 7
0 7
]”.
NOTE:
It is only possible to read revolutions
if a transducer has been installed. A [
--
] will
be shown in the display if the transducer is
not connected.
Reading P.T.O. revolutions
The symbol for the relevant transducer is shown on the screen.
Menus
Using the keyboard
Selection of the above parameters are carried out in the menus [
].
During changes in the menus, the display will flash [
S E T
S E T
] and a
menu number.
The menus can be scrolled to and fro with the arrow keys [
].
When the chosen menu is shown on the display, press the menu key
[
]
for more than 3 seconds to open the menu. The display will then
change to a new picture so further selections can be made between
different set-ups or parameters. When modifying a parameter, pro-
longed pressure on the arrow key will cause the data shown on the
display to alter faster. After the parameter is modified, press the accept
key [
]. The display then changes back to the previous picture.
Press the accept key [
] until the display returns to the main dis-
play.
All parameters in menus 01 to 11 are saved in the display’s memory
and are not lost when the power is disconnected.
HARDI PILOT
HARDI
165
PTO
