25
Assembly
HP 3010 tractor junction box
The box is fitted at a conven-
ient place at the rear of the
tractor. The cables should face
downwards.
The coaxial cable is led into
the tractor cabin and con-
nected to the display.
The power supply is 12 Volt
DC.
Connect transducer cables.
For flow transducer, cut cable
approx. 30 cm from connectors
and fit plug and socket.
Brown wire is positive
“
⊕
”.
Blue wire is negative
“
−
”.
Fuse 4.0 Amp Ø 6, 5 x 32 F. Quick acting (HARDI ref. no. 261617)
It is recommended that the power supply should come directly from the
battery.
If desired, the power supply may come via the ignition key of the
vehicle.
An on/off switch can be fitted over the jumper connection if this is
desired.
NOTE:
Do not connect to the alternator or suspect installation.
PILOT
PILOT
PILOT
