20
[ 11 ] HARDI LINK
HARDI LINK needs to know which is the last unit on the communica-
tion net so that no electrical interference occurs. Last unit is under-
stood as meaning there are no more HP 3XXX units on the cable after
the display. (The display must not be equipped with a coaxial T-link).
Method
1. Open menu 11.
2. Use the arrow key to choose [
Y e s
Y e s
].
Keystrokes
11
HARDI PILOT
HARDI
n E t
1 1
Set
HARDI PILOT
HARDI
E n d
n E t
O F
y
E S
Set
Areameter and HP 3570
Points to note if the system is fitted with
an areameter.
• The system will register covered area
when the south side of the magnet is
located directly in front of the
areameter transducer.
• When the system is used with a flow
transducer, the areameter must be
disabled. This can be done by pre-
venting the magnet from positioning in
front of the transducer or by discon-
necting the transducer.
5-7
m
m
