30
Flow transducer for EC operating unit
1. The distribution valve unit is detached from the main ON/OFF valve
unit. Note the orientation of the ball seat and remove it from the
distribution valve unit.
2. Mount the flow transducer housing just before the distribution
valves.
3. Attach distribution valves with flow housing with the ball seat on the
end to main ON/OFF valve unit.
4. Flow transducer is fitted to the housing and connected to HP 3010
via the a 3 poled plug.
P.T.O. transducer and areameter
The south side of the magnet must face the transducer.
Distance between them must be 5 to 7 mm.
An adjustable hose clamp drilled with a 4.5 mm hole can be used to
attach the magnet to the P.T.O. shaft.
5-7
m
m
5-7 mm
