Page 13
For technical questions, please call 1-888-866-5797.
Item 93762
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the power Switch of the tool off and unplug the tool from its electrical outlet
before performing any procedure in this section.
TO pREVENT SERIOUS INJURy:
DO NOT OpERATE WITH ANy GUARD DISABLED, DAMAGED, OR REMOVED.
Moving guards must move freely and close instantly.
To Use the Vise
1. Raise the Body Frame (62) to its vertical
position, and lock the Body Frame in place
with the Support Plate (154) and Locking
Pin (158)
(see Figure I on page 11)
.
2. Open the Moveable Vise Plate (146) to
accept the workpiece by rotating the Hand
Wheel (180) counterclockwise
(see Figure N)
.
3. Place the workpiece on the Machine Bed (147).
If the workpiece is long, support the end.
Moveable Vise plate (146)
Hand Wheel
(180)
Machine Bed (147)
Mitering Vise plate (143)
Figure N
4. Clamp the workpiece firmly against the Mitering
Vise Plate (143) with the Moveable Vise Plate
by rotating the Hand Wheel clockwise.
To Use the Quick Vise Adjustment for an Angle cut
1. Loosen the Bolt (138) and adjust the Mitering Vise
Plate to the desired angle as indicated by the Angle
Scale (170)
(see Figure O)
. Re-tighten the Bolt.
2. Loosen the Bolt (144) and adjust the
Moveable Vise Plate to parallel the Mitering
Vise Plate. Re-tighten the Bolt.
Mitering Vise
plate (143)
Bolt (138)
Moveable Vise
plate (146)
Bolt (144)
Angle Scale (170)
Figure O
Содержание Central Machinery 93762
Страница 1: ......