EE
EE
EE
11
WIRING
1C
2. Wrap electrical tape (not included) around each
individual wire connector (EE) down to the wire as
shown in Fig. 2.
WARNING
: Make sure no bare wire or wire strands
are visible after making connections. Place green and
white connections on opposite side of box from the black
and blue (if applicable) connections.
Turn spliced/taped wires upward and gently push wires
and wire connector (EE) into outlet box.
2
1C
.
FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES:
If you intend to control the fan and light
with separate wall switches, connect
BLACK
wire from
fan to
BLACK
wire from the independent wall switch for
the fan. Connect
BLUE
wire from fan to the
BLACK
wire from the independent wall switch for the light.
Connect
WHITE
wire from fan to
WHITE
wire from
ceiling. Connect all
GROUND (GREEN)
wires together
from fan to
BARE/GREEN
wire form ceiling. [Fig. 1C]
Note:
Black wire is hot power for fan. Blue wire is hot
power for the light kit. White wire is common for fan
and light kit. Green or bare wire is ground.
EE
Wire connector
x 4
Hardware Used
