FAN AND LIGHT CONTROLLED BY PULL CHAIN
10
1A
1B
WIRING
WARNING
: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12 gauges there is more than one house wire to connect to
the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION
: Be sure outlet box is properly grounded or that a ground (green or base) wire is
present.
WARNING
: if house wires are different colors than refereed to in the following step, stop
immediately. A professional electrician is recommended to determine wiring.
EE
Wire connector
x 4
1. Choose wiring diagram that fits your situation and
make appropriate wiring connections as follows:
[
NOTE
: For each wire connection below, and on the
following page, use one of the wire connectors (EE),
making sure to screw wire connector (EE) on in a
clockwise direction.
1A.
FAN AND LIGHT CONTROLLED BY PULL CHAINS:
connect
BLACK
and
BLUE
wire from fan to
BLACK
wire from ceiling. Connect
WHITE
wire from fan
to
WHITE
wire form ceiling. Connect all
GROUND
(GREEN)
wires together from fan to
BARE/GREEN
wire from ceiling. [Fig. 1A]
1B.
FAN CONTROLLED BY PULL CHAIN, LIGHT BY
WALL SWITCH:
If you intend to control the fan by pull
chains and light with a separate wall switch, connect
BLACK
wire from fan to
BLACK
wire from ceiling.
Connect
BLUE
wire from fan to the
BLACK
wire from
the independent wall switch for the light. Connect
WHITE
wire from fan to
WHITE
wire from ceiling.
Connect all
GROUND (GREEN)
wires together from
fan to
BARE/GREEN
wire form ceiling. [Fig. 1B]
Hardware Used
Wiring
