A
A
B
Slot
“J” Hook
A
B
CC
8
ASSEMBLY INSTRUCTIONS
4. Pass the 120-volt supply wires through the center hole in
the mounting bracket (A).
Install the mounting bracket (A) by raising it to a UL
listed electrical box (not included) and securing with
mounting screws and washers (not included).
Note
:
It is very important that you use the proper
hardware when installing the mounting bracket (A) as
this will support the fan.
Note
: Remove the preassembled s
hort mounting screws
(CC) from the mounting bracket (A) and motor assembly
(B) before continuing to the next step.
5. Carefully hang the motor assembly (B) onto the
mounting bracket (A) by inserting the “J” hook into a slot
on one side of the mounting bracket (A).
Note
:
See “Wiring” section for wiring the fan before
continuing to Step 6.
6. Lift motor assembly (B) to mounting bracket (A). Align
holes and secure motor assembly (B) with short
mounting screws (CC).
4
5
Short Mounting Screw
x 3
Hardware Used
6
CC
