Switch
Housing
Fig. 2C
Fig. 2B
Fig. 2A
14
OPERATING INSTRUCTIONS
1. The pull chain labeled FAN has four positions to control
fan speed. One pull is HIGH, two is MEDIUM, three is
LOW and four turns the fan OFF.
2. Use the fan reverse switch, located on the switch
housing, to optimize your fan for seasonal performance.
A ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat setting in
winter without feeling a difference in your comfort.
Note:
Wait for fan to stop before moving the reverse
switch.
2A. In
warmer
weather, push the reverse switch to
UP
and see a Sun icon, which will result in downward
airflow creating a wind chill effect.
[Fig. 2A]
2B. In
cooler
weather, push the reverse switch to
DOWN
and see a snowflake, which will result in
upward airflow that can help move stagnant, hot air
off the ceiling area. [Fig. 2B]
IMPORTANT:
Reverse switch must be set either
completely to the UP or completely to the DOWN for
fan to function. If the reverse switch is set in the middle
position [Fig. 2C], fan will not operate.
1
2
Operating Instructions
