HappyJapan HCD3E, Инструкция

Страница: 171 / 362

-SA -26
15-1
MACHINE SETTINGS
5_1 R701
Before embroidering, check the basic settings of the machine.
The rest of the settings can be left at default values (as indicated by underline or blue icon).
No. Display Settings
(std : Underlined or Blue)
Contents
1 Fine mode The machine emphasizes stitch quality by controlling embroidery
speed.
By default it is set to "NO".
2 Tightness level
- (Loos))
□ (Normal)
+ (Tight)
The machine adjusts thread tightness level by controlling the timing
of frame move.
By default it is set to "Normal".
3 TRD. break back
1- 50 (6)...
0 .........
On thread breaks, this causes sewing position & frame to move
backwards by several stitches before the detected break before
stopping.
･The frame will be moved backward by the preset stitch numbers
･
The frame will not be moved
5 Width data limit
1 - 13mm
(13=12.7)
When stitch length exceeds this length, the machine divides it by
this jump length and creates multiple movements. Width data limit
becomes 12.7mm only when setting value is set to 13.
Please use a smaller number when you use thick and heavy material.
Stitch length
Jump Jump
Stitch
Stitch
Stitch
Stitch
Jump length Jump length Jump length
6 Quick start mode If you set to "No", the machine will increase speed slowly. Please
select "No"
when you have a problem with skipped stitches on the beginning
stitch after thread trim.
YES : The machine sews up to 3 stitches slowly after thread cut.
NO : The machine sews up to 5 stitches slowly after thread cut.
7 Auto thread cut This performs automatic thread cut after color change and stop.
8 Cut at jump data
1- 8 (3) .
When a set number of continuous jumps exists in pattern data, the
machine cuts threads before jumping.
• Machine trims the thread on setting number of constant jump.
• Does not trim.
Jump
Jump Jump
Auto thread cut
Stitch
Stitch