Happy HCS, Инструкция

Страница: 38 / 94

-CS -32
5-7
PREPARATION OF PATTERN DATA
Select an embroidery pattern from memory
To select an embroidery design previously
stored into the machine memory.
1. Press the "MENU" button until [MENU] is
shown when the machine is stopped.
2. Press the “Up” or “Down” Arrow button until
the cursor points to "Pattern".
3. Press "ENT." button.
The cursor will be on "Select".
4. Press the "ENT." button when showing
[Select].
The Upper line indicates the current pattern ID
number (if any).
The Lower line indicates the pattern name and
ID number of a pattern you can select.
5. Press the “Up” and “Down” Arrow button to
choose the embroidery pattern.
6. Press the "ENT." button.
The display will show ”OK” or ”Cancel”.
7. Press the "ENT." button.
Make your selection and return to drive mode.
Press the ”Down” Arrow button then press
the "ENT." button to cancel selecting a
design from the memory.
5_7 D610
FORWARD
P.FOOT T.CUT
MENU
ENT.
ID:14 Nd: 6
FANTASIA
G
FORWARD
P.FOOT T.CUT
MENU
ENT.
[MENU] Pattern
Needle
FORWARD
P.FOOT T.CUT
MENU
ENT.
[MENU] Pattern
Needle
2
FORWARD
P.FOOT T.CUT
MENU
ENT.
[SELECT] OK
Cancel
FORWARD
P.FOOT T.CUT
MENU
ENT.
[SELECT](ID:10)
14 FANTASIA
FORWARD
P.FOOT T.CUT
MENU
ENT.
[PAT.] Select
Erase
3
FORWARD
P.FOOT T.CUT
MENU
ENT.
[SELECT](ID:10)
10 CAT
4
5
6
7
1