Happy HCS, Инструкция

Страница: 48 / 94

-CS -40
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
5-15
SETTING AUTOMATIC COLOR CHANGE
5_15 D610
FORWARD
P.FOOT T.CUT
MENU
ENT.
ID: 2 Nd: 4
0
G
[MENU] Pattern
Needle
1
[MENU] Pattern
Needle
2
[NDL] 1: 4
2: 0
[NDL] 1: 4
2: 0
6
[NDL] 1: 0
2: 0
7
[NDL] 1: 0
2: 0
3
[NDL] 1: 0
2: 0
4
5
8
Needle numbers are set for each color number
of the selected pattern.
When a color change is set, the machine auto-
matically changes to the selected needle and
continues sewing automatically.
1. Press the "MENU" button until [MENU] is
showing when the machine is stopped.
2. Press the “Up” or “Down” arrow button until
the cursor points to "Needle.
3. Press the "ENT." button when showing
[NDL].
4. Press the “Up” and ”Down" arrow button to
point the cursor at the required color
change number.
Ex. : Needle no. 4 to be the first color.
5. Press the "ENT." button.
An Underscore will be shown when no needle
has been selected.
6. Press the “Up” and ”Down" arrow" bu tton to
set the preferred needle number.
The number will increase by pressing the “Up”
arrow button.
The number will decrease by pressing the
”Down” arrow button.
7. Press the "ENT." button.
Repeat procedure 4. thorough 7. to set any other
color changes required.
8. Finally, Press the "MENU" button until a
green lamp shows on control box (Drive
Mode).
When the green light shows you are in the Drive
mode and you can start the embroidery.