Happy HCS, Инструкция

Страница: 72 / 94

-CS -62
FORWARD
P.FOOT T.CUT
MENU
ENT.
FORWARD
P.FOOT T.CUT
MENU
ENT.
9-4
SEWING
9_4 D610
Going back to the start of design data (Top)
To stop sewing at a midpoint, change the design location in the hoop, then restart from the
beginning.
If you use the menu item “Top”, you can make the pattern data only return to the start point with
the frame position left where it is.
Placing the design in the center of the selected embroidery frame (Center)
Move embroidery frame position to the center automatically.
ID: 2 Nd: 4
BIRD
1
2
P.FOOT T.CUT
MENU FORWARD
ENT.
Org Top Cnt Pos
G
ID: 2 Nd: 4
BIRD
1
2
P.FOOT T.CUT
MENU
FORWARD
ENT.
Org Top Cnt Pos
G
1. If you press and hold the “MENU” button for
a few seconds, you will see the direct frame
movement menu.
2. Press the “Up” arrow button.
The design data will return to the beginning point
of the pattern data.
The display returns to drive mode, and the drive
lamp is green.
If you want to get back to the previous status
from “Top”. Do procedure #1, and #2 again.
CAUTION: To prevent accidents.
The frame moves quickly.
Keep hands away from the frame.
1. If you press the “MENU” button for a few
seconds, you will see the direct frame
movement menu.
2. Press the “Down” arrow button.
The embroidery frame will move to the center
automatically, and the pattern data will return to
the start point.
(Top) will be indicated on the panel.
The display returns to the drive mode, and the
drive lamp is green.
If you want to get back to the previous status
from “Center”. Do procedure #1 and #2 above
again.