Haojue EG150, Руководство пользователя

Страница: 32 / 100

EN
(32) Haojue EG150 99011H11A81H000 V02 EN+FR 2019-4-24
B
WARNING
Operating the engine without the air filter in place
can be hazardous. A flame can spit back from the
engine to the air cleaner without the air filter to
stop it. Severe engine damage can also occur if
dirt enters the engine due to running the engine
without the air filter.
Never run the engine without the air filter in place.
B
CAUTION
Failure to check the air cleaner frequently if
the motorcycle is used in dusty, wet, or muddy
conditions can damage your motorcycle. The air
filter can become clogged under these conditions
and engine damage may result.
Always check the air filter after riding in severe
conditions. Clean or replace the filter as necessary.
Air filter removal
1. Insert the ignition switch key into
the right cover lock
2
, turn it
clockwise and remove the right
cover
1
.
2. Remove the nut
6
.
3. Remove the screw
4
and loosen the bolt
5
to loosen
the interface between the air filter and the carburetor
(do not contaminate the interface at the carburetor
end). Open the air filter cover
3
and take out the
element assembly.
4. Clean the dust on the air filter’s shell and that on the
air filter cover’s inner wall.
5. Dismantle the air filter element from the air filter
element
7
.
Clean the filter
Clean the filter as described below.
1. Fill a properly-sized basin with non-flammable
detergent (A) and immerse the filter into the detergent
solution.
2. Squeeze the detergent out of the cleaned filter with
both hands. Never twist the filter to avoid breaking it.
3. Immerse the filter in engine oil (B), squeeze out any
remaining oil, and leave the filter slightly oiled.
4. Reinstall the cleaned filter or new filter in reverse order
(32) Haojue EG150 99011H11A81H000 V02 EN+FR 2019-4-24
30