manualshive.com logo in svg

HANYOUNG NUX TH510 Series, Руководство по эксплуатации, Страница: 59 / 85

Поделиться
Скачать
HANYOUNG NUX TH510 Series Скачать руководство пользователя страница 59

57

Bef

or

e star

ting

Installation

Op
er

ation

S

cr

een blo

ck 

diagr

am

Function set

ting

Pr

ogr

am

Sy

stem set

ting

Sp
ecifications

1. Proportion(P) zone
  - Set proportional band. If the proportional band is larger, control output becomes smaller for the
     offset and thus the setting value is reached later. If the proportional band is smaller, control output
     becomes larger for the offset and thus the setting value is reached quicker but there might
    be hunting if it is too quick.

2. Integral(I) time
  - Set integral time. There can be offset only with proportional control. Integral is used to reduce the
     offset. If the integral time is too long, it is changed too late but if it is too short, there might be 
     frequent hunting.

3. Derivative(D) time
  - Set derivative time. To compensate for sharp temperature change, control output is proportional to
     the angle of temperature change. If derivative time is longer, compensation becomes stronger.

4. Upper limit of output (O/H)
  - Set upper limit of output range.

5. Lower limit of output (O/L)
  - Set lower limit of output range.

▶ PID value

Parameter

Setting range

Default

Proportion(P) zone

0.00 ~ 100.00

5.00

Integral(I) time

0.0 ~ 3000.0

100.0

Derivative(D) time

0.0 ~ 3000.0

25.0

Upper limit of output (O/H)

0.00 ~ 100.00

100.00

Lower limit of output (O/L)

0.00 ~ 100.00

0.00

Fig. 75) PID value

هﺮﮐ

 

ﮓﻧﺎﯿﻧﺎﻫ

 

تﻻﻮﺼﺤﻣ

 

یرﺎﺼﺤﻧا

 

هﺪﻨﯾﺎﻧﻤ

 

ناﻮﯿﺳ

 

ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Содержание TH510 Series






















































































Отзывы:

Нет отзывов