Hanwha Techwin Wisenet SPD-152, Руководство пользователя

Страница: 42 / 66

42_
setup
Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection
mode.
When no router is used
●
manual Setup mode
– Internet connection method: Connect with a static IP or dedicated line, or connect a decoder and a remote
user in the LAN (local area network) environment.
– Network setting method: Set the connected decoder's < Ip type > to < manual >.
￭
Consult your network manager for IP, Gateway and Subnet Mask.
●
DhCp mode
– Internet connection method: Connect a decoder directly to a cable modem, connect a decoder directly to a
DHCP modem, or connect a decoder directly to the optical LAN.
– Network setting method: Set the connected decoder's < Ip type > to < DhCp >.
When a router is used
￭
Check the following items to avoid collision with the decoder's static IP.
●
Setting up the Decoder Static Ip
– Internet connection method: Connect a decoder to an IP router connected to a cable modem, or connect a
decoder to an IP router in a LAN (local area network) environment.
●
Setting up the Decoder Network
1.
Set the <
Ip type
> of the connected decoder to <
manual >.
2. Make sure that the IP is within the static IP range provided by the IP router.
IP address, Gateway, and Subnet mask: Consult your network manager.
￭
If a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you should set the IP address out of the
configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~ 192.168.0.254).
3.
Check the Gateway address and subnet mask are equal to those set in the Broadband Router.
●
Setting the DhCp Ip Address of the broadband Router
1. Enter the access address of the IP router in the internet browser of the local PC connected to the IP router to
access the setup menu of the IP router. (ex: http://192.168.1.1).
2.
In this case, first, specify the Windows network settings of the local PC as in the following example.
Example)
IP: 192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
– Once connected to the Broadband Router, it prompts with a password. If you do not enter anything for the
User Name, enter “ admin ” in the password and click < Ok >, then the IP router setting page will appear.
– Access the router's DHCP configuration menu and set its DHCP server activation, and provide the start and
end address.
￭
Start address: 192.168.0.100
￭
End address: 192.168.0.200
￭
Above steps may differ from the router devices depending on the manufacturer.
port Setting
Setup > Network > Ip & port > port
●
HTTP port: Enter the port value for the HTTP web viewer. The initial value is set to < 80 >.
●
HTTPS port: Enter the port value for the HTTPS web viewer. The initial value is set to <
443
>.
￭
HTTPS is a version of HTTP web communication protocol with advanced security. If security is important when accessing the web viewer, enable the
HTTPS port.
●
Cam Proxy Port: Sets the camera proxy port. The initial value is set to < 10001 >.