Hanwha Techwin Wisenet SPD-152, Руководство пользователя

Страница: 39 / 66

English
_39
•
SE
TU
p
setup
•
SE
TU
p
Camera password setup
You can change the passwords of all registered cameras at once.
You can register the ID and password of the camera that you use.
Setup > Camera > Camera password
●
Password: Enter a new password for the camera in the factory default status according to the password setup
rules.
The initial password for the camera must be entered.
●
Confirm password: Input the new password again.
●
ID: Enter the ID and the ID of a camera whose password is set.
●
Password: Enter the password of a camera whose ID and password are set.
￭
When the password is in factory default status, it can be changed and managed in a batch.
￭
If you click < >, a basic guide for password setup is displayed.
￭
Check <
Show password
> to see the password that you are currently entering.
￭
If you check the <
Change the password of all registered cameras
> option, the passwords of all cameras are changed with the entered
password.
￭
Up to 3 sets of camera IDs with passwords and passwords can be registered.
You can auto-detect a camera with the ID/PW information of a registered camera on the "
Channel setup
>
Auto detect
" screen and directly
register.
￭
A camera password registered with ONVIF and RTSP cannot be changed.
Dynamic gOV/fpS setup
Dynamic GOV is a function that automatically changes the length of GOV depending on the video situation. For
details, refer to the camera's help or the product's user guide.
At the bottom of the <
Detailed profile configuration
> screen, press the <
Dynamic gOV & fpS
> button to
open the dynamic GOV/FPS setup popup for the channel.
●
Profile: Shows the video profile of the connected camera setup.
●
Dynamic FPS: Automatically adjusts the frame rate (frames per second) based on the video conditions.
●
Dynamic GOV
– Mode: Set the GOV length to change automatically.
– Length: Enter the maximum GOV length value to be applied when there is no motion in the video. Minimum
GOV value can be set on the camera web page.
– Range: The range of the input value of < length > is displayed.
￭
Any profile not supported with the dynamic GOV/FPS setting is marked with '-'.