manualshive.com logo in svg

Hanwha Techwin Wisenet SPD-152, Руководство пользователя

Поделиться
Скачать
Hanwha Techwin Wisenet SPD-152 Скачать руководство пользователя страница 28

28_

 live 

zoom in

You can zoom in or out the video via digital zoom.
Select the desired channel and click <   >. 
Enters the digital zoom mode. 

￭ 

In PTZ mode, click < 

 > to run the digital zoom.

● 

: Exits the digital zoom mode.

● 

 /  : Zooms in or out of the video. 

● 

Minimap: When the video is zoomed in by 10%, a minimap is displayed. You can quickly check the desired 
location in the enlarged video through the minimap.

Audio

You can turn the sound on/off corresponding to the channel in Live mode.
Select the desired channel and click < 

 >.

Audio output can only be turned on in one channel. The audio output of other channels will be automatically 
turned off.

￭ 

If you have configured the audio output settings properly but the audio or voice is not output, check if the connected network camera supports 
the sound signal and if you have configured the sound settings as appropriate. 
The sound icon can be displayed if the sound signal fails to output from noise.

￭ 

Only the channel where the <

Audio

> is set to <

On

> in “

Setup

 > 

Camera

> 

Channel setup

” menu displays the audio icon  

( 

 ) in Live mode that you can use to turn the sound on or off.

Change Channel Aspect Ratio

You can change the aspect ratio of each channel. 
Select the desired channel and click < 

 >. 

It changes to the actual proportion of the video.

Содержание Wisenet SPD-152



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды