HPS-BPWDMXLED QUATTRO
Hanson
ProSystems
–
www.hansonprosystems.com
User
Manual
Page
9 of
28
Features:
•
Battery Powered & Wireless DMX
•
Rechargeable Battery with up to 12 hours of battery life
•
Digital battery power indicator 0-100%
•
Wireless DMX-512 protocol
•
Built in 2.4G transceiver for wireless DMX operation (Optional: WDMX)
•
126 auto jumping channel frequencies with high anti-jamming ability to ensure work reliability
•
7 ID codes for multiple transceiver use
•
Wired DMX-512 protocol
•
Ability to send DMX protocol from the DMX output of the Quattro, using a standard DMX cable
to any generic DMX fixtures when using the Quattro fixture wireless.
•
3-pin and 5 pin DMX input and output connectors (Optional: 5 pin DMX)
•
RGBWA color mixing (Optional: RGBA or RGBW)
•
11 -4 in1 Watt LED 6 RGBW, 5 RGBA
•
25 degree lenses (Optional: 15º,45º,60º lenses)
•
Electronic
Dimming
0-100%
•
Operation menu with function buttons and DMX control mode
•
LED display for address and function setting
•
Control DMX channels 6, 12,45 or 51 CH
•
Full linear pixel mapping capabilities
•
Strobe 1-255 / Color strobe 1-255
•
Master / Slave Synchronization via wireless and wired
•
Operation modes: DMX, Sound Active and Auto Modes
•
Built in microphone for sound active mode
•
LED chases (Adjustable Speeds)
•
Dual bracket for floor stand and / or hanging mount
•
Dual eye bolts for safety cables
•
LIGHTWEIGHT for easy transport (19 LBS)
•
COMPACT for low visibility
•
VERSATILE LED wireless lighting fixture
•
AC power auto ranging (100-240v 50/60HZ) In/Out
•
Length 19.3 in (431.8 mm)
•
Width 3.5 in (76.2 mm)
•
Height 9 in (279.4 mm)
•
Weight 19 lbs (5.44 kg)
HPS-BPWDMXLED QUATTRO
Hanson
ProSystems
–
www.hansonprosystems.com
User
Manual
Page
10 of
28
5. Set Up
AC Power:
Before plugging your fixture in, be sure that the power source voltage in your area
matches the required voltage for the fixture. The QUATTRO works in 100-220V/50~60Hz. Line voltages
may vary from venue to venue; therefore you should be sure that the fixture voltage matches the wall
outlet voltage before attempting to operate it. Always connect the fixture to a protected circuit (circuit
breaker or fuse). Make sure the fixture has an appropriate electrical ground to avoid the risk of
electrocution or fire. Never connect the fixture to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0% to 100% switch.
Charging the Battery:
The battery included with the QUATTRO does not come completely
charged. It is recommended that you charge the fixture for at least 6 hours before your initial use. The
QUATTRO comes with a replaceable lithium-ion battery for cable-free and wireless operation. To charge
the battery, simply plug in the power con cable into the “power con input” at any time before, during, or
after operation. Switch the battery switch to the CHARGE position, at this point the fixture will start the
charging process.
Battery Life Display:
The battery life display located in the menu options of the LED Display
shown as “BTCC” will display the remaining amount of internal battery life 0-100%. See Menu Map on
page 13 & 14
to find “BTTC”.
Battery Charge Indicator:
The QUATTRO has a battery charge indicator on the front left portion
of the fixture. When charging, the LED indicator will turn red. Once the fixture is fully charged the LED
indicator will turn green. See fixture diagram on page 7 for the location of the Battery Charge Indicator.
Battery Maintenance:
The QUATTRO should be charged for at least 6 hours prior to initial
operation for optimal battery usage. To keep the battery in optimal operating condition, store the fixture in
a cool, dry place and charge it at least once every 30 days when it has not been in use. Avoid exposure
to extreme temperatures. If the fixture is exposed to extreme cold or hot temperatures this may cause the
battery to fail or shorten the life of your battery. Your battery has a run time of up to12 hours of battery life
per charge and 6 hours of recharge time.
Fuse Replacement:
The QUATTRO has two different fuses, one for the AC power 5A/250V and a
second fuse for the battery 5A/250V. Always replace a blown fuse with a fuse of the same type and
rating. The fixture does not ship with spare fuses.
1.
Disconnect the fixture from the power outlet before replacing the fuse and turn off the battery.
2.
Use a Phillips screwdriver to remove fuse holder.
3.
Remove the blown fuse from the holder and replace with a fuse of the exact same
type and
rating.
4.
Insert the fuse holder back in place and reconnect power.
