HPS-BPWDMXLED QUATTRO
Hanson
ProSystems
–
www.hansonprosystems.com
User
Manual
Page
5 of
28
2. Safety Precautions:
•
This fixture is intended for
indoor use only
; use of this fixture outdoors voids warranty.
•
To reduce the risk of electrical shock or fire, do not expose or spill this fixture to any liquids or
moisture.
•
Do not spill water or any other liquids onto your fixture.
•
The fixture should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
•
The ambient temperature must always be under +35° C.
•
Be sure that the local power outlet matches the required voltage for your fixture.
•
Do not attempt to operate the fixture if the power cord has been frayed or broken.
•
Do not attempt to remove or break off the ground from the electrical cord. This ground is used
to reduce the risk of electrical shock and fire in case of an internal short.
•
Disconnect from main power before making any type of connection.
•
Never plug this fixture into a dimmer pack.
•
Power-supply cords and DMX cables should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. Pay particular attention to the point they
exit from the fixture. This does not apply when in wireless operation.
•
Fuse standard is 5A/250V for AC power and 5A/250V for the Battery.
•
Grounded
using
yellow/green
line.
•
During long periods of non-use, disconnect the fixture from main power source.
•
Do not remove the cover under any conditions. There are no consumer serviceable parts
inside.
•
Never operate this fixture if the cover is removed.
•
Do not attempt to operate this fixture if it becomes damaged.
•
Always be sure to mount this fixture in an area that will allow proper ventilation. Allow about
3” (7.62cm) between this fixture and a wall.
•
Always mount this fixture in a safe and stable manner.
•
The fixture should be serviced by qualified service personnel when:
1.
The power-supply cord or plug has been damaged.
2.
Liquid has been spilled into the fixture.
3.
The fixture has been exposed to rain or water.
4.
The fixture does not appear to operate normally or exhibits a marked
change in performance.
•
The fixture should be cleaned only as recommended by Hanson ProSystems. See “Cleaning”
on page 25 for more details
•
This product contains a rechargeable battery. This battery contains hazardous chemicals that
cannot be discarded with household waste. Contact your local waste management service for
recycling information when disposing of the battery
.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this fixture to rain,
liquids or moisture. Beware, the housing may become extremely hot; avoid touching the fixture with
bare hands while fixture is in use.
Caution!
Avoid looking directly into the light source. Use sensible precaution as this may cause eye
damage.
3. Handling Precautions:
There are no user serviceable parts inside of this fixture. Do not
attempt to make any repairs yourself; doing so will void the Hanson ProSystems warranty. If
the
warranty seal is broken
or tampered with, customer's warranty is also void along with any warranty
claims. In the unlikely event that your fixture requires service, please contact Hanson ProSystems
during customer support hours. Hanson ProSystems is NOT liable for any damages caused by the
non-observance of this manual or any unauthorized modification to this fixture.
HPS-BPWDMXLED QUATTRO
Hanson
ProSystems
–
www.hansonprosystems.com
User
Manual
Page
6 of
28
General Information
Introduction:
The QUATTRO is a battery powered and wireless DMX LED fixture. It contains 6, 12,
45, and 51 DMX channel modes. This fixture is designed to be a versatile, compact and lightweight for
up-lighting, stage wash, LED effects and full linear pixel mapping capabilities. The QUATTRO can
operate as a standalone fixture or in a master slave configuration. This fixture has multiple pre
programs, manual operations, internal strobe, sound active, wired and wireless DMX built in.
Customer Support:
Hanson ProSystems customer service line provides help and answers for
any questions you may have or problems you may encounter during your set up and/or initial operation.
You may also visit our website at www.hansonprosystems.com if you have any comments or
suggestions. Customer Support hours are Monday through Saturday from 10:00am to 7:00pm EST.
Phone:
305-623-2900
Toll
Free:
1-(855)462-4HPS
(477)
Fax:
305-626-8300
Email: [email protected]
Warranty Registration:
The QUATTRO includes a 3 year (1095 days) limited warranty for the
LEDs and internal components. The battery carries a 1 year (365 days) limited warranty. The wireless
antenna on the fixtures has no warranty. Please fill out the enclosed warranty card to validate your
purchase and warranty. All returned service items whether under warranty or not, must be freight
pre-paid and have a return authorization (R.A.) number. If the fixture is under warranty you must provide
a copy of your original invoice. Please contact Hanson ProSystems customer support department for an
(R.A.) number.
