background image

 

-

 17

 

Hanskamp AgroTech B.V. (the Netherlands)

 

www.hanskamp.nl/en

 

 

FeedStation

 

EN

 

42000

 

2.3.1 General Safety 

 

• 

 Read and understand the manual and all safety signs before you connect power 
supplies to operate or adjust the FeedStation. 

 

• 

Only trained persons are permitted to operate the FeedStation. A first

-

aid kit must 

be available near the FeedStation. Store in a highly visible place.

 

• 

A carbon dioxide or foam fire extinguisher must be available near the FeedStation. 
Store the fire extinguisher in a highly visible place.

 

• 

Install all protective covers and guards before you operate the FeedStation.

 

• 

Wear the correct protective clothing and equipment. Disconnect and isolate the 
electrical power supply before you clean or do maintenance on the FeedStation, 
also be sure that the compressed air supply is depressurised. 

 

• 

Know the emergency medical centre number for your area.

 

• 

Contact your nearest milking equipment dealer provider if you have any questions

 

• 

Review safety related items with all operators frequently (annually). 

 

 

2.3.2 Electrical Safety

 

• 

Only an authorized electrician must install the electrical power supply for the 
FeedStation.

 

• 

Make sure the electrical grounding of the electrical system and all parts of the 
FeedStation meet the local rules and regulations.

 

• 

Replace any damaged electrical lines, conduits, switches and components immedi-
ately.

 

• 

Isolate the electrical power supply before you open the lid of the FeedStation to 
work on the electrical system. 

 

 

2.3.3 Installation Safety 

 

• 

 Read and understand the instructions in this manual.

 

• 

Make sure the FeedStation is correctly installed. 

 

 

2.3.4 Operating Safety 

 

• 

Read and understand the applicable manual and all safety signs before you con-
nect power supplies to operate or adjust the FeedStation.

 

• 

Only trained persons are permitted to operate the FeedStation.

 

• 

Switch off the electrical power supply by taking plug out of the power point and 
secure the plug before you clean or do maintenance on the FeedStation. 

 

• 

Install the covers and guards before you operate the FeedStation.

 

• 

Keep hands, feet, hair and clothing away from all the electrical parts.

 

• 

Keep unauthorized persons, especially small children away from the FeedStation at 
all times.

 

• 

Before the electrical supply is attached to the FeedStation, make sure all parts are 
tight and that all the parts are in good condition.

 

• 

Contact your nearest milking equipment dealer if you have any questions. 

 

 
 

Содержание FeedStation 42000


















Отзывы: