8
-
17
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
FeedStation
EN
42000
Safety stickers
The user and installer are responsible for the safe operation and maintenance of the
FeedStation. Safety stickers are used to ensure safety in and around the FeedStation.
Information about which stickers should be attached where can be found further on in
these instructions for installation and use (incl. Fig. 3).
Applying the stickers:
•
Make sure the surface is dry and clean.
•
Make sure the surface temperature is at least 5°C.
•
Find the right position for the sticker.
•
Remove a small portion of the foil on the back.
•
Place the sticker on the surface and press a small portion of the self
-
adhesive
layer onto the surface.
•
Carefully remove the foil and press down the rest of the sticker.
•
Remove any air bubbles with a needle and use the foil to smoothen the sticker.
Maintenance of the stickers:
•
Keep the safety stickers clean and legible. Clean the safety stickers with soap and
water. Do not use any solvents or abrasives that could damage the safety stickers.
•
Replace missing or illegible safety stickers.
•
Safety stickers are obtainable from Hanskamp. Always specify the item numbers
in correspondence.
Sticker warning risk of impact
001
-
703
-
000
3
001
-
703
-
000
