13
-
17
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
FeedStation
EN
42000
Maintenance
Check the FeedStation daily for faults, dirt and wear and tear. It is important to keep
the feed station clean for the benefit of animal health and the station
’
s lifespan.
Please note! When doing maintenance, always first switch off the voltage
to the feed station.
Disassembly
During disassembly, all parts must be separated according to type of material and as-
signed to the relevant waste processing flow.
Please note! When dismantling the station, always first switch off the volt-
age to the feed station.
List of included amendments of this installation and operating instruction:
Warranty limitations
The warranty excludes costs and expenses due to:
-
incorrect use of the equipment, not in accordance with the specifications in the
instructions for installation and use;
-
the consequences of any interventions by engineers other than engineers recog-
nised and approved by Hanskamp for carrying out service, maintenance and other
technical work;
-
incidents such as freezing, ice, fire, flooding, inundation or any other form of ex-
treme water damage, and lightening;
-
defects in the electrical system or earthing system;
-
damage to the electrical system caused by vermin and so forth.
The warranty is not applicable to consequential damage that is not related to the feed
station itself. All systems have been tested. However, in the event of faults, Hanskamp
cannot be held responsible for consequential damage.
Nr.
Release datum
Chapter(s)
Remarks
1
08/2013
First release
1.1
09/2013
All
Change to long version of PipeFeeder
1.2
10/2013
Safety
Installation statement deleted. FeedStation is not a machine.
2.0
01/2014
All
Second edition, FeedStation Redesign.
3.0
08/2014
All
Converted into Publisher
3.1
02/2015
All
Parallel clamp changed
3.2
10/2015
All
General inspection
3.3
4/2015
All
Clamp 1910 replaced for mounting materials
3.4
6/2016
Annex 3
Article structure
3.5
1/2017
Page 11
Install PF heights and safety cow
Copyright and disclaimer
The information given in this publication is provided for information purposes only and does not constitute an offer for sale. The products supplied may
differ from those illustrated. No part of this publication may be reproduced or made public without prior permission in writing from Hanskamp AgroTech
BV. Although this publication was put together with the utmost care, Hanskamp AgroTech is not liable for any damage that might arise due to errors or
gaps in this publication. The instructions for installation and use in Dutch are the original instructions for installation and use. The translations into other
languages have used the Dutch instructions for installation and use as the source document. Hanskamp AgroTech does not accept any liability for differ-
ences between the translations. If there are doubts about the content and accuracy of the translated instructions for installation and use, the Dutch
instructions for installation and use constitute the authoritative document.
