6
-
17
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
FeedStation
EN
42000
2.3.5 Maintenance Safety
•
Read and understand the applicable manual and all safety signs before you con-
nect power supplies to operate or adjust the FeedStation.
•
Only trained persons are permitted to maintain the FeedStation.
•
Switch off the electrical power supply by taking plug out of the power point and
secure the plug before you clean or do maintenance on the FeedStation.
•
Wear protective clothing and safety goggles when you do work on the pneumatic
system.
•
Make sure all the covers and guards are installed when maintenance work is com-
plete.
2.3.6 Safety Decals
•
General safety messages appear in this safety messages section. Specific safety
messages are in applicable parts of this manual when potential hazards may occur
if the instructions or procedures are not followed.
